Fixed_Tabs
Onclick
  • Register

Solar Water Heater - Evacuated Tube Collector

Overview

Features of an Evacuated Tube Collector System

  • Suitable for domestic(Home)applications available in different capacities
  • Stainless Steel Tig Welded Inner Tank
  • Superior Quality PUF Insulation
  • Pure Polyester Powder Coated Aluminum Outer Cladding
  • MNRE Approved Collector Design
  • Three Target Selectively Coated Borosilicate
  • Pure Polyester Powder Coated Stands & Support
  • Indirect heating- Heat Exchanger type and Preasurised application systems are also available

Specification

Specification - Hot Water Storage Tank – ETC

Capacity of Tanks : 200 LPD
Material : Stainless Steel /GRP/Boiler grade steel.
Type : Cylindrical – horizontally assembled.
Size : Ø460, Length 2110.
Insulation : P U F.40-50mm.
Outer Cladding : Pre coated galvanized Steel/Aluminum.
Outer Finishing : Pure Polyester Powder Coating finish.
Outer Finish Color : Golden Yellow & Black combination.
Back up Heater : 2 KW With thermostat control 230V AC.
Tank Supports : Fabricated Stainless steel.
Tank Testing : Factory pressure tested for normal systems is at 1 Kg/cm².
Normal Working pressure of the system : Less than 0.3 Kg/cm².

ETC – System Technical Specifications Collector

Number of Tubes : 28 No’s
Evacuated Tube Dimensions : Outer Diameter - 47± 0.7.mm, Inner Diameter- 37±0.7.mm
Total Tube length : 1500±5mm.
Type of tube selective coating : Graded Al-N with Copper under Coating
Configuration of Glass Tubes : Two Concentric Borosilicate Glass Tubes.
Solar absorbance : >0.93.
Solar Emmitance. (at 80°C) : <0.06.
Evacuation between Outer & Inner Tubes : 5 × 10-3 Pa.
Rated Pressure : 0.1. Mpa. (1.Kg/Cm²)
Stagnation Temperature : <300°C

Support

#

Service

+ 91 80 43550218  |  + 91 80 43550203  |  + 91 80 43550266

(24/7 IVR Support)

This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

 

S5 Box

Register

*
*
*
*
*

Fields marked with an asterisk (*) are required.